Mulberry Leaves for Isopods: An Accessible Food Source Worth Exploring
Mulberry leaves are one of the most accessible natural foods available to many isopod keepers in South Africa. They are easy to forage in season, can be dried for long-term storage, and, in my experience, are readily accepted by a wide range of isopod species.
Yet mulberry leaves were not always a commonly discussed food source in the isopod-keeping community. When I started keeping isopods, oak leaves were frequently recommended, and mulberry leaves were something I used largely because they were convenient.
Over time, my own observations led me to investigate their nutritional properties, how isopods respond to them, and which preparation methods work best. This article documents my experience and explores why mulberry leaves deserve a closer look.
My Introduction to Isopod Keeping
My adventure into exotic pets began on 20 December 2022, when I acquired my first tarantula, a Chilean rose tarantula. At that point, my interest was firmly focused on spiders.
In May 2025, I purchased ten Dairy Cow isopods (Porcellio laevis). I placed them in an enclosure with plenty of food and, when I checked approximately twenty days later, I was surprised to discover that the food was gone and there were around a hundred mancae — newly hatched juvenile isopods.
That experience certainly caught my attention!
Around the same period, I attended the SOS Reptile Show in late April 2025, where I purchased Rubber Ducky and Panda King isopods. Initially, I regarded my Dairy Cows primarily as a cleanup crew. Gradually, however, my interest in isopods eclipsed my interest in tarantulas.
Mulberry leaves became part of my early feeding routine simply because they were readily available in my area. Oak leaves were often recommended by other keepers, but they were more difficult for me to obtain consistently.
Rather than waiting until I could find oak leaves, I used the mulberry leaves I could collect locally.
Mulberry Leaves: A Favourite in My Enclosures
As I expanded my collection and split colonies, I began noticing a recurring pattern: my isopods generally seemed very willing to feed on mulberry leaves.
This was not an observation limited to a single colony. Across the species I kept, mulberry leaves appeared to be a well-accepted food source.
Other keepers have reported similar experiences.
In June 2023, a keeper shared observations of Armadillidium gestroi grazing on mulberry leaves [Armadillidium gestroi feeding on fresh mulberry leaves — June 2023], and in December 2025, another keeper described mulberry leaves as a particular favourite [Mulberry leaves might be the catnip for isopods — December 2025].
These reports are interesting because they reflect observations made independently by different keepers. However, anecdotal reports cannot establish whether mulberry leaves are nutritionally superior to oak, other deciduous leaves, or other suitable food sources.
I also prefer to test husbandry advice independently wherever practical. A food being readily eaten is useful information, but it does not, on its own, establish its nutritional completeness or its effects on growth and reproduction.
Nevertheless, my experience suggests that mulberry leaves are worth considering as a regular component of a varied isopod diet.
Mulberry Leaves and Their Nutritional Properties
My interest in mulberry leaves deepened when I discovered how extensively they have been studied as a source of nutrients and bioactive compounds.
Mulberry leaves are used in traditional medicine and have attracted considerable interest because of their chemical composition. They contain protein, fibre, minerals and various plant compounds, including polyphenols and flavonoids.
Research reviews have documented the nutritional composition of leaves from different mulberry species, including Morus alba and Morus nigra.
For example, this review examines the phytochemical composition of mulberry leaves and other parts of the plant [Phytochemical Composition of Different Botanical Parts of Morus Species, Health Benefits and Application in Food Industry].
Mulberry leaves have also been investigated as animal feed, particularly for livestock. Research has explored their protein content, digestibility and potential use as a supplementary feed ingredient [Potential of Mulberry Leaf Biomass and Its Flavonoids to Improve Production and Health in Ruminants].
What does this mean for isopods?
It is tempting to assume that a plant described as a nutritional superfood for humans or a valuable feed ingredient for livestock must also be particularly beneficial for isopods. However, this conclusion requires caution.
Terrestrial isopods are detritivores adapted to feeding on decomposing organic material. Their nutrition involves not only the plant material itself but also the microorganisms associated with it. The nutritional quality and decomposition stage of leaf litter can influence feeding and other aspects of their biology.
A review of terrestrial isopod nutrition discusses their specialised feeding ecology, digestion and use of microbially colonised organic matter [Nutrition in terrestrial isopods (Isopoda: Oniscidea): An evolutionary-ecological approach].
Although mulberry leaves have documented nutritional properties, this does not demonstrate that they are a complete diet for captive isopods or that they necessarily produce better growth or reproduction than other leaves.
I have not established these outcomes through controlled feeding trials, rather my observations regarding their acceptance as food are personal, and the practical advantages of collecting and storing them is something I wanted to solve for my own colonies.
Mulberry Leaves: A Hardwood Tree
The definition of hardwood is a little strange. You might reasonably assume that hardwood refers to how hard the wood actually is, but that isn't quite how the classification works. The distinction is botanical rather than simply a measure of the wood's physical hardness.
Hardwoods come from flowering plants, scientifically classified as angiosperms. These trees generally have broad leaves and produce seeds enclosed within a fruit. Softwoods, on the other hand, come from gymnosperms, which include conifers such as pine trees. Their seeds are typically produced in cones [Royal Forestry Society, accessed 8 November 2026].
One reason this classification can be confusing is that hardwood trees are often deciduous, meaning they lose their leaves during autumn or winter. However, losing leaves is not what makes a tree a hardwood.
Some hardwood trees are evergreen, retaining their leaves throughout the year. A good South African example is the indigenous Wild Olive (Olea europaea subsp. africana), which is an evergreen flowering tree [SANBI, accessed 8 November 2026]. Conversely, some softwood trees, such as the larch, are deciduous and shed their needles seasonally. These examples demonstrate that whether a tree is evergreen or deciduous is separate from its botanical classification as a hardwood or softwood.
Mulberry trees (Morus) belong to the flowering plant group and are therefore classified as hardwoods. This remains true even though they lose their leaves during winter.
Interestingly, the classification doesn't necessarily tell us how hard the timber will be. Balsa, for example, is technically a hardwood despite being exceptionally soft, while some softwoods can produce remarkably hard timber.
Not All Hardwoods Are Suitable for Isopods
It is important to understand that just because a tree is classified as a hardwood does not automatically mean that its leaves or wood are suitable for isopods. Different trees contain different natural chemical compounds, and some can be unsuitable for use in an isopod enclosure.
Pine is a particularly good example of a wood that I would generally avoid. Pine trees produce a natural substance called oleoresin, which contains a mixture of resin acids and volatile compounds known as terpenes. Turpentine, traditionally used as a solvent and paint thinner, is obtained by distilling this pine resin.
These resinous compounds are one of the reasons pine and other resinous coniferous woods are generally avoided in isopod keeping. Fresh pine wood, bark, needles and other resinous materials are best left out of your enclosures. There is little reason to take the risk when there are plenty of suitable alternative hardwoods available.
Cedar is another wood I would avoid. Cedar blocks are commonly sold as natural insect repellents, particularly for protecting clothing from moths. Their effectiveness comes from aromatic compounds naturally present in the wood, including various terpenes and other volatile substances.
These compounds are precisely why I would not introduce cedar into an isopod enclosure. Although their effects have not been adequately established for all terrestrial isopod species, using a wood specifically marketed for its insect-repellent properties seems an unnecessary risk.
For my own isopod enclosures, I prefer to use confidently identified, untreated deciduous tree leaves and suitably decomposed hardwood. As with any natural material, it is important to consider the tree species, its condition and whether it may have been exposed to pesticides or other contaminants.
That said, unidentified wood is not necessarily harmful, and some keepers may choose to experiment with unfamiliar materials. However, I would approach this with considerable caution. Any experimentation should involve careful, long-term observation before considering the material suitable for regular use. Ultimately, when it comes to the health and survival of your isopods, is an unidentified piece of wood really worth the risk?
Finding Mulberry Leaves in South Africa
One of the biggest advantages of mulberry leaves is accessibility.
Mulberry trees are grown in many parts of the world, and their leaves can provide a useful seasonal resource for isopod keepers. In my area, mulberry trees are relatively easy to find, making them a convenient alternative when other suitable leaf litter is difficult to source.
The genus Morus includes several species, with Morus alba and Morus nigra among the best-known. Black mulberry (Morus nigra) is the species I have commonly associated with the trees in my area, although I have seen other species whilst collecting leaves.
Different mulberry species and growing conditions can influence leaf composition. Consequently, leaves collected from different trees should not automatically be treated as nutritionally identical.
I previously shared some of my foraging experiences on Reddit [Foraging for isopod food: Easy finds — June 2025].
As with any foraged plant material, collection should be restricted to trees that can be confidently identified and that have not been exposed to pesticides or other contaminants. Avoid collecting leaves from roadside areas with high traffic or places like farms where chemical treatments may have been used.
Preparing Mulberry Leaves: My Experiments
A question that frequently appears in isopod-keeping discussions is how best to prepare freshly collected mulberry leaves.
Should they be frozen? Air-dried? Oven-dried? Should they be fed fresh or stored for later use?
I experimented with several methods and observed noticeable differences in the resulting leaves. All leaves were washed before preparation to remove surface dirt. I collected them from areas where I had no reason to expect pesticide exposure.
1. Freezing Fresh Leaves
My first approach was to freeze fresh mulberry leaves.
Unfortunately, I was not particularly pleased with the results. After freezing, the leaves developed a freezer-burnt appearance, with discolouration that looked as though the leaf structure had been damaged.
Freezing can damage plant tissues through the formation of ice crystals, so the appearance was not surprising. However, I did not investigate the microscopic structure of the leaves, and I cannot confirm exactly what caused the changes I observed.
The important practical point is that frozen leaves did not produce the appearance I wanted for my stored leaf supply.
2. Washing and Air-Drying
I next tried washing the leaves and drying them outdoors in the air.
This approach was considerably more successful. The leaves dried reasonably well, and the method required little equipment.
However, I encountered another problem: some leaves began to rot and developed an unpleasant smell. Especially if left in water for more than 6 hours.
My suspicion was that insufficient air circulation, together with leaves remaining damp for too long, contributed to the problem. I also recognised that the leaves needed to be turned more frequently to help them dry evenly.
This method can work, but it requires suitable drying conditions and regular inspection. Warm weather alone does not guarantee that leaves will dry quickly enough to prevent deterioration.
3. Low-Temperature Oven-Drying
My most successful approach so far has been to use an oven at a low temperature of approximately 60°C.
This gave me much greater control over the drying process. I could monitor the leaves, turn them as necessary and allow them to dry progressively. The only concern with this method is my electricity bill!
Conclusion: A Practical Resource for Isopod Keepers
Mulberry leaves and wood became part of my isopod-keeping routine because they were easy to find. I continued using them because, across my colonies, I repeatedly observed that the isopods appeared to accept them readily.
The nutritional literature provides additional reasons to investigate mulberry leaves, but there is still a distinction between understanding the plant's chemistry and demonstrating its specific benefits to captive terrestrial isopods.
My preparation experiments have also shown me that the method used to dry leaves matters in practical terms. Freezing produced an appearance I disliked, outdoor air-drying was more successful but occasionally resulted in spoilage, and low-temperature oven-drying gave me the most controllable results so far.
I intend to continue exploring natural foods for my isopods, testing husbandry advice where practical and documenting what I observe.
Happy keeping!